Fleece Wheel

In Linear finishing by Patrick0 Comments

Ø 115 fleece wheels provides 50% more longevity and therefore 50% price-effectiveness over Ø 100 wheels.

Product Overview

  • It is possible to obtain a working width of 110 mm (fits all satin finish tools) with 60, 80 and 180 grits and a diameter of 115 mm. This is due to the tightening screw being sunk into the wheel allowing you to grind up to the edge. With a vibration-damping sleeve for single, double and quadruple spline shafts, ensuring the wheel runs perfectly.
  • By manufacturing the wheels in diameter 115 mm and 105 mm means there is a substantial longevity increase over conventional 100 mm wheels. This is due to the amount of abrasive material being greatly increased.

 
Achieves an industrial finish (matt and satin) with no shadow . Also used for pre-polishing, removing oxide layers and smoothing “pre-ground” sheet metal and smoothing surfaces.

Tech Specs

DIMENSIONS
(MM)
IDEAL SPEED
(RPM)
MAX. SPEED
(RPM)
PKG. UNITGRIT
(K)
ARTICLE NUMBER
Ø 115 x 1101,000-2,5005,000460
80
180
43061
43101
43181
Ø 115 x 1001,000-2,5005,0004280
400
600
900
43281
43401
43601
43901
Ø 115 x 501,000-2,5005,000460
80
180
280
400
600
43060
43100
43180
43280
43400
43600
Ø 105 x 1001,000-2,5005,000460
80
180
280
400
600
43061a
43101a
43181a
43281a
43401a
43601a
Ø 105 x 501,000-2,5005,000460
80
180
280
43060a
43100a
43180a
43280a

Leave a Comment

2 × 5 =