Description
- It is possible to obtain a working width of 110 mm (fits all satin finish tools) with 60, 80 and 180 grits and a diameter of 115 mm. This is due to the tightening screw being sunk into the wheel allowing you to grind up to the edge. With a vibration-damping sleeve for single, double and quadruple spline shafts, ensuring the wheel runs perfectly.
- By manufacturing the wheels in diameter 115 mm and 105 mm means there is a substantial longevity increase over conventional 100 mm wheels. This is due to the amount of abrasive material being greatly increased.
Achieves an industrial finish (matt and satin) with no shadow . Also used for pre-polishing, removing oxide layers and smoothing “pre-ground” sheet metal and smoothing surfaces.
Ø 115 fleece wheels provides 50% more longevity and therefore 50% price-effectiveness over Ø 100 wheels.
| DIMENSIONS (MM) |
IDEAL SPEED (RPM) |
MAX. SPEED (RPM) |
PKG. UNIT | GRIT (K) |
ARTICLE NUMBER |
|---|---|---|---|---|---|
| Ø 115 x 110 | 1,000-2,500 | 5,000 | 4 | 60 80 180 |
43061 43101 43181 |
| Ø 115 x 100 | 1,000-2,500 | 5,000 | 4 | 280 400 600 900 |
43281 43401 43601 43901 |
| Ø 115 x 50 | 1,000-2,500 | 5,000 | 4 | 60 80 180 280 400 600 |
43060 43100 43180 43280 43400 43600 |
| Ø 105 x 100 | 1,000-2,500 | 5,000 | 4 | 60 80 180 280 400 600 |
43061a 43101a 43181a 43281a 43401a 43601a |
| Ø 105 x 50 | 1,000-2,500 | 5,000 | 4 | 60 80 180 280 |
43060a 43100a 43180a 43280a |
